Cap Compression Molding Machine is used to make soda bottle cap and water bottle cap by high temperature plasticizing. This machine is easy to operate, saving electricity, water and labour cost. Compared with the same energy consumption injection machine, the production can be growth to three or four times. Besides, there is no any wasted material. So it decreases the cost of cap making greatly.
| SPECIFICATION | JOBO-16C | JOBO-24C | JOBO-36C |
|---|---|---|---|
| TYPE | JOBO-16CS | JOBO-24CS | JOBO-36CS |
| CAPACITY | 7800-10200 PCS/HR | 12000-20000 PCS/HR | 20000-27000 PCS/HR |
| CAP DIAMETER | 18-60 MM | 18-60 MM | 18-60 MM |
| CAP HEIGHT | 12-50 MM | 12-50 MM | 12-50 MM |
| TOTAL INSTALLATION POWER | 29 KW | 45 KW | 68 KW |
| ACTUAL PRODUCTION POWER | 20 KW | 35 KW | 55 KW |
| AIR CONSUMPTION | 0.5M3/MIN | 0.5M3/MIN | 0.6M3/MIN |
| VOLTAGE | 380V, 50HZ | 380V, 50HZ | 380V, 50HZ |
| MACHINE SIZE | L3050*W1270*H2000 MM | L3600*W1550*H2000 MM | L4180*W1920*H2000 MM |
| MACHINE WEIGHT | 3500 KG | 5000 KG | 6500 KG |
